MuckingLoader Slag discharge tool for mine and diversion tunnel
2018/11/16
We use loaders for open-air loading, but in the face of the diversion tunnels built by mines and Hydropower stations, our loaders are almost powerless, but our slag pickers are used in place of loaders in these places. The slag scraper produced by our company can load from 60 cubic meters to 220 cubic meters per hour according to the size of the model. The most commonly used are 60 cubic meters and 80 cubic meters. Such mines and diversion tunnels also account for the majority.
WZT-60皮带轮式扒渣机
The main body of the slag scraper is composed of three parts: excavating arm, conveyor belt and tire type traveling chassis. The load per hour can reach 60 cubic meters, and the motor is equipped with 15 KW three motors. The width of conveyor belt is 650, the maximum suitable stone can not exceed 600*600, the minimum turning radius is 4.5 meters, the excavation width is less than 2800 mm, the excavation height is less than 2500 mm, the working height of slag scraper is less than 2050, and the unloading height is 1250-1600 mm. Wheel type slag scraper is suitable for the roadway with a slope less than 10 degrees. The walking speed is two kilometers per hour. The weight of the whole machine is 3 tons, and the overall size of the whole machine is 5800 * 1600 * 1950.
WZT-60皮带轮式扒渣机
The belt wheel type slag picking machine is divided into box type and bridge type. The box type has relatively high price, but the chassis hardly needs maintenance, while the bridge type has maintenance and later maintenance.
四不像,四不像车
Four unlike the car is mainly used to cooperate with the slag scraper in the tunnel, the front slag scraper loads, the rear four unlike the car to transport the slag out of the tunnel, the four unlike the car with FAW Xichai 64 horsepower diesel engine, 145 gearbox, 1069 air-breaking brake rear axle, the rear axle is a retractable bridge, so that the whole body is narrowed, straightened. The width of the car is 1.6 meters, the wheelbase is 2.3 meters, the vehicle length is 4.2 meters, and the carriage size is 2800*1600*700. The capacity is 3 cubic meters and the carrying capacity is 8 tons.